Support by service : Frequently Asked Questions about Arcstar Universal One Virtual

Service menu support information

Service menu support information

Questions

I cannot bind more than 8 destination UseNetworks to vCore.

Answer

Please be advised the maximum number of destination UserNetwork that can be configured on portal is '13', but the maximum number of destination UserNetwork that can be binded to vCore at a time is '8'.
* If you try to register more than 13, an error message "more than table limit" appears.

*According to the situation, the number of destination UserNetwork can be reduced by changing the destination UserNetworks to network address.
<Example>
Host A(192.168.0.1/32)
Host B(192.168.0.2/32)
If these two are registered, they can be integrated into one destination UserNetwork
such as  Network A(192.168.0.0/17)

The number of destination UserNetwork is limited, so please refer to FAQ below, too.

*FAQ
  When trying to add a destination UserNetwork, the message "The address is incorrect" is displayed.
   http://support.ntt.com/en/vpn-virtual/faq/detail/pide23000000cg