Support by service : Frequently Asked Questions about Arcstar Universal One Virtual

Service menu support information

Service menu support information

Questions

Is it possible to set the same IP address for different destination User Networks?

Answer

Even if a part of IP address of plural desination UserNetworks are the same, that has no effect on the service.
However, please note that the service does not work normally if the completely same addresses are binded to vCore.

[Available]
-Destination UserNetwork A 172.16.0.0/17
-Destination UserNetwork B 172.16.0.1/32
> Although Destination UserNetwork B is the host address in the Destination UserNetwork A, the service works normally.

[Available]
-Destination UserNetwork A 172.16.0.0/17
-Destination UserNetwork B 172.16.0.0/18
> Although Destination UserNetwork B is the network address within the Destination UserNetwork A, the service works normally.

[Not available]
-Destination UserNetwork A 172.16.0.0/17
-Destination UserNetwork B 172.16.0.0/17
> If both the destination UserNetwork and subnet mask are the same, service will NOT work normally.