Support

Search

Close

My Support

Close

  • Guest Welcome
  • Login
  • Register
  • Help
  • 「」, Are you sure you want to register this support information to My Support?

    • Register
    • Cancel


Frequently Asked Questions

Information regarding frequently asked questions in a list.

11-20 / 176 items

How can I reset the password for matrix authentication?- NTT Communications Business Portal

you can change the password from the Login screen. Please refer to “3. Change or reset password of Portal” in the User manual for authentication screen
(can be displayed from Help menu on Login screen).

To details page

Inquiry

When trying to add a destination UserNetwork, the message "The address is incorrect" is displayed.- Arcstar Universal One Virtual

The four addresses below cannot be registered as a destination UserNetwork and therefore the message "The address is incorrect" is displayed.
-0.0.0.0/0
-10.0.0.0/8
-172.16.0.0/12
-192.168.0.0/16

Note that this error also occurs and the address cannot be registered when (1) the host address is set to other than "/32," (2) there is an incorrect relation between the network address and subnet, (3) a global IP address is entered, and (4) wrong IP address is entered (like, extra "0" is included).

[Examples]
 (1)192.168.0.1/24 (correct address: 192.168.0.1/32)
 (2)192.168.1.64/24 (correct address: 192.168.1.64/26)
 (3)200.200.200.1/32 (global IP addresses cannot be registered)
 (4)192.168.00.1/32 (correct address: 192.168.0.1/32)

If you would like to use the address range mentioned above, please divide the segment in two, and make two destination addresses.

[Examples]
* When you would like to use 10.0.0.0/8(10.0.0.1 ~ 10.255.255.254)
 > 10.0.0.0/9 and 10.128.0.0/9

* When you would like to use 172.16.0.0/12(172.16.0.1 ~ 172.31.255.254)
 > 172.16.0.0/13 and 172.24.0.0/13

* When you would like to use 192.168.0.0/16(192.168.0.1 ~ 192.168.255.254)
 > 192.168.0.0/17 and 192.168.128.0/17

To details page

Inquiry

On which OS does vApp run?- Arcstar Universal One Virtual

vApp runs on the following OS'es.
[Windows] 7 / 8.1 / 10 
[Android] 4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 5.0 / 5.1 / 6.0 / 7.0 / 8.0
[iOS] 6.1 / 7 / 7.1 / 8 / 8.1 / 9 / 9.1 / 10 / 11
[MacOS] 10.9 / 10.10 / 10.11 / 10.12 / 10.13

To details page

Inquiry

I cannot connect even if I have reinstalled vApp(Windows) and Microsoft Visual C++ 2010 SP1 Redistributable Package.- Arcstar Universal One Virtual

In case you cannot connect even if you have conducted reinstallation of vApp(Windows) and Microsoft Visual C++ 2010 SP1 Redistributable Package, please confirm your usage enviroment by following this procedure.

See More

Inquiry

I cannot connect to the Virtual Network via vAdapter.- Arcstar Universal One Virtual

If you cannot successfully connect to the virtual network via vAdapter, please follow the steps below to check the settings.

See More

Inquiry

I cannot connect to a destination UserNetwork.- Arcstar Universal One Virtual

If you cannot connect to a destination UserNetwork, check your settings by following the steps below.

See More

Inquiry

How can I confirm whether a configuration profile of an iPhone / iPad is deleted from a device or not?- Workspace MDM

You can confirm the status on the management site, if the following conditions are fulfilled;
・The device was iOS 5 or later when the configuration profile was installed on the device.
・The device was connected with the management server when the configuration profile is deleted from the device.
If a configuration profile is deleted, the color of the "Communication Date" on an asset page becomes red and “(Unmanaged)" is added after communication date. If those conditions are not fulfilled, check the last communication date. The last communication date is not updated if the configuration profile is deleted because the device is not communicated with a server.

To details page

[iOS:Application Distribution] Can I change the application name of the original application at the timing of version upgrade?- Workspace MDM

Application name can be changed by version upgrade. Please follow the steps below.
1.Set the two Bundle ID to the same value.
・The Bundle ID in the application (ipa) already distributed and manifest file (plist).
・The Bundle ID in the application (ipa) after changing the application name and manifest file (plist).
This Bundle ID will be the same as "Application ID" displayed when manifest file is registered on the management screen.

2.Upload the application (ipa) after changing the application name and manifest file (plist) set in 1 by [Upload application] which is on the upper right of [Original Application Registration].

3.After uploading, download the created distribution manifest file (plist).

4.Click [Edit] in the created setting set of the application before the upgrade, check "Upload" in "Manifest file", specify the manifest file downloaded in 3. with [Browse] and save.

To details page

[iOS:Configuration profile] I failed to install Configuration profile. (*There is a difference between setting items by supervised target and unsupervised target)- Workspace MDM

Please note that depending on the setting items of the configuration profile, devices that can be delivered may be separated from supervised devices and unsupervised devices. Items only applicable to the supervised devices exist in the items of the configuration profile. When trying to send to unsupervised device a file in which items applicable only to the supervised device are checked, configuration profile installation fails.

To details page

I cannot activate this product.- Workspace MDM

1) Is your PC connected to the internet?
To activate the license, your device needs to be connected to the Internet.
Check the Internet connection of your iPhone or iPad.

2) Make sure that Apple Push Certificate is registered?
To activate license, Apple Push Certificate needs to be registered.
Refer to "Apple Push Certificate-Register Apple Push Certificate-Register Apple Push Certificate" in 《Management Site User Manual iOS》 for details registering Apple Push Certificate.

3) Is the Company Code or Authentication Code which you entered correct?
If the Company Code or Authentication Code is incorrect, you cannot activate it.
Check your Company Code and Authentication Code again.

4) Do you have enough licenses?
You cannot activate this product for more instances than the number of licenses.
Contact your administrator or help desk about the number of licenses.

5) Confirm your setting of Safari
You cannot activate this product if your setting of Safari does not accept Cookies.
Please choose [Settings]-[Safari]-[Accept Cookies]-[Always] temporarily.

6) Is your device jailbroken?
If the device is jailbroken, installing a profile may fail to complete.
Contact your administrator or help desk.

7) Have you set the "Web filtering" before activation of this product?
If yes for iOS 9.0 and 9.1, configuration profiles of this product cannot be installed. Therefore, an authentication page cannot move to next page and the activation of this product is no longer finished.

To details page

To the top of this page